The Series 2000 is a complete range of ‘intelligent’ pressure and level transmitters with local display and adjustment by three pushbuttons. The pushbuttons
are used to set Zero and Span. Test pressures are not required for calibration.
The display which can indicate a number of chosen engineering units is also used during programming to assist the easy operation. Process temperatures
can be shown and damping times can be adjusted from 0 to 25 secs. Also a 4-20 mA Current Simulation can be performed.
The Series 2000 is fully temperature compensated. Over 40 different process connections are available including many flush diaphragm designs. Options include ATEX approval or HART® protocol.